Upcoming events

Switch to Calendar View

• Art Hop at Ideaworks

  • Start
    02 Jan 2025
  •  
  • End
    03 Dec 2026
  •  
  • Schedule
    24 sessions
  • Location
    Fresno Ideaworks

  
  

  Show details
• Intro Woodshop (beginners, refresher & safety)

  • Start
    12 Jul 2026
  •  
  • End
    26 Jul 2026
  •  
  • Schedule
    3 sessions
  • Location
    Ideaworks - 1730 H Street, Fresno, CA. 93721
  • Spaces left
    0

  Registration is closed

  Beginning Woodshop runs for 3 sessions of 4 hours and assumes no previous woodworking experience.  The goal is to train students in the basic use and safety aspects of the major tools in the woodshop.  

  Students should plan to attend all three classes.  
  
  The first meeting will cover  basic safety and project selection.  The second and third sessions will be devoted to a project that will reinforce the skills learned on day 1.  We will be using many of the tools we practiced on, as well as some layout and marking skills, to build a small project that you will be able to take home and be proud of!

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection
    
  • Ear plugs if requested
    
  • Materials for class projects
    

  Upon completion of the class, Ideaworks members may be certified to use the covered woodshop tools unsupervised during business hours with instructor's approval.

  FREE MONTH OF MEMBERSHIP - New members only

  This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:  

  Join us
  

  Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  Show details
• Welding (beginners, refresher & safety)

  • Start
    15 Jul 2026
  •  
  • End
    29 Jul 2026
  •  
  • Schedule
    3 sessions
  • Location
    Ideaworks - 1730 H street, Fresno, CA. 93721
  • Spaces left
    3

  Register

  
  

  Beginning Welding is a 3-session course; each session is 3 hours. Students will gain a core understanding of how to operate welding equipment safely and get familiar with basic techniques.  This class is for hobbyists, makers, artists, or anyone wanting to try something new and challenge themselves a bit in a comfortable collaborative environment.
  

  Check the class times shown to ensure you can make it to every session.

  What Not to Wear:
  

  • Do not wear rings or other jewelry. 
    
  • No open toe shoes (anywhere in the facility)
    
  • Do not wear clothing made from synthetic or synthetic blends. The synthetic fabric can burn vigorously, melt and produce skin burns.
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required in the facility. A cotton cloth mask is safest around open flame. Your instructor will explain the safe use of face masks around welding equipment.

  
  We will provide:
  

  • Eye protection
    
  • Face hood/shield
    
  • Leathers
    
  • Insulated gloves
    
  • Ear plugs
  • Materials for class projects
  • Please bring any hoods/gloves/leathers if you have them
    

  Upon completion of the class, Ideaworks members may be certified to use the Weldatorium tools unsupervised during business hours.

  Free Month of Membership For First-time students

  This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:  

  Join us
  
  

  Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

  
  

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  Show details
• Wood Lathe - Bowl Turning

  • When
    22 Jul 2026
  •  
    5:30 PM - 9:30 PM
  • Location
    Ideaworks - 1730 H Street, Fresno, CA. 93721
  • Spaces left
    3

  Register

  
  

   If you’ve ever admired wooden bowls and wondered how to make them, here is your opportunity! We will guide you step by step through the process of turning your own bowl on the lathe with traditional turning tools. You’ll learn about stock selection, chucking, how to turn, lathe safety, and different bowl finishes. The cost of the class includes instruction as well as the wood to make the bowl, sandpaper, and finish. At the end of the day, you’ll have a bowl to take home! Length of class depends on students abilities, and can vary from 2 to 4 hours.

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards must be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection and face protection
  • Ear plugs if requested
    
  • Materials for class projects
    

  
  

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  Show details
• Beginning/Refresher Laser Cutting for Ideaworks Members

  • Start
    22 Jul 2026
  •  
  • End
    23 Jul 2026
  •  
  • Schedule
    2 sessions
  • Location
    Fresno Ideaworks Modern Fabrications Lab
  • Spaces left
    4

  Register

  
  

  In this class you will learn the fundamentals of lasers and how to use them for etching and cutting with the Boss LS1630 Laser Cutter.  The project-based class topics covered will include how to use a laser cutter safely, set up jobs, and use Lightburn software for laser control and project design. A choice of one of three small projects (materials provided) will reinforce principles of design and laser control learned in class. Students will schedule time with the instructor to complete five additional supervised projects (participants will provide their own materials).

  • This class is appropriate for students 14 and older. All minors must have a parent or guardian in the facility at all times.
  • Registration is limited to Ideaworks Members
    
  • Participants must have the ability to pay attention and focus for the entire length of the class session.
  • Experience with computer operation and drawing programs recommended.
  • Laptops will be provided, but you are encouraged to bring your own.

  Upon completion of the class and additional projects, Ideaworks members may be certified to use the Boss LS1630 laser cutter unsupervised during business hours with instructor's approval.
  

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are not required in the facility but we appreciate all efforts to help limit the spread of illness.

  Join us

  
  

  Show details
• Beginning/Refresher Laser Cutting for Ideaworks Members

  • Start
    10 Aug 2026
  •  
  • End
    11 Aug 2026
  •  
  • Schedule
    2 sessions
  • Location
    Fresno Ideaworks Modern Fabrications Lab
  • Spaces left
    4

  Register

  
  

  In this class you will learn the fundamentals of lasers and how to use them for etching and cutting with the Boss LS1630 Laser Cutter.  The project-based class topics covered will include how to use a laser cutter safely, set up jobs, and use Lightburn software for laser control and project design. A choice of one of three small projects (materials provided) will reinforce principles of design and laser control learned in class. Students will schedule time with the instructor to complete five additional supervised projects (participants will provide their own materials).

  • This class is appropriate for students 14 and older. All minors must have a parent or guardian in the facility at all times.
  • Registration is limited to Ideaworks Members
    
  • Participants must have the ability to pay attention and focus for the entire length of the class session.
  • Experience with computer operation and drawing programs recommended.
  • Laptops will be provided, but you are encouraged to bring your own.

  Upon completion of the class and additional projects, Ideaworks members may be certified to use the Boss LS1630 laser cutter unsupervised during business hours with instructor's approval.
  

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are not required in the facility but we appreciate all efforts to help limit the spread of illness.

  Join us

  
  

  Show details
• Introductory Wheel throwing Ceramics

  • Start
    13 Aug 2026
  •  
  • End
    03 Sep 2026
  •  
  • Schedule
    4 sessions
  • Location
    Ideaworks - 1730 H street, Fresno, CA. 93721
  • Spaces left
    0

  Join waitlist

  

  This introductory class focuses on wheel throwing and basic glazing. It is perfect for a group of friends, family, couples or even by yourself (you will make friends in this class, we promise). In this class, you will be learning the basics of forming a ball of clay into a beautiful vase, cup, mug, bowl, or plate using an electric potter's wheel. If you’re feeling especially inspired to take on more… how about a bird feeder or planter!?! The possibilities are endless with pottery.

  All materials will be provided. Additionally, the items you create go home with you to share with your friends and family. All items made are food, dishwasher, and microwave safe.

  What Not to Wear:
  

  • Do wear comfortable clothing that is easily laundered.
  • Please trim fingernails short. Long nails make manipulating clay on the potter's wheel very difficult. Similarly, rings, bracelets, and wristwatches will damage your creations.
    
  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards must be securely tied back.
  • Currently face masks are recommended but not required in the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide all materials for class projects.

  Upon completion of the class, Ideaworks members may be certified to use the covered ceramics studio tools unsupervised during business hours.

  FREE MONTH OF MEMBERSHIP - New members only

  This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:  

  Join us
  

  Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

  
  

  
  

  Show details
• Intro Woodshop (beginners, refresher & safety)

  • Start
    16 Aug 2026
  •  
  • End
    30 Aug 2026
  •  
  • Schedule
    3 sessions
  • Location
    Ideaworks - 1730 H Street, Fresno, CA. 93721
  • Spaces left
    3

  Register

  Beginning Woodshop runs for 3 sessions of 4 hours and assumes no previous woodworking experience.  The goal is to train students in the basic use and safety aspects of the major tools in the woodshop.  

  Students should plan to attend all three classes.  
  
  The first meeting will cover  basic safety and project selection.  The second and third sessions will be devoted to a project that will reinforce the skills learned on day 1.  We will be using many of the tools we practiced on, as well as some layout and marking skills, to build a small project that you will be able to take home and be proud of!

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection
    
  • Ear plugs if requested
    
  • Materials for class projects
    

  Upon completion of the class, Ideaworks members may be certified to use the covered woodshop tools unsupervised during business hours with instructor's approval.

  FREE MONTH OF MEMBERSHIP - New members only

  This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:  

  Join us
  

  Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  Show details
• Beginning CNC Routing/Engraving (4'X8' bed)

  • Start
    17 Aug 2026
  •  
  • End
    20 Aug 2026
  •  
  • Schedule
    2 sessions
  • Location
    Fresno Ideaworks - 1730 H Street Fresno, CA 93721
  • Spaces left
    3

  Register

  
  

  This is an introductory course on how to use the CNC machine with an emphasis on safety. In this class, you will examine the entire work flow of the CNC process, learn how to import geometry, investigate certain editing techniques, and the necessary requirements to create the g-code for tool calibration.  This final process will include setting feed and speed, how to input specifications of the raw material, etc. Finally, students will be able learn how to setup the device, how to load and secure materials, and how to set the home position and run a simple job.  This introductory class does not include any Computer Aided Design (CAD) instruction. 

  This unique class provides information and techniques that differ from those used on other CNC machines at Ideaworks. Certification on other similar machines does not grant permission to use others. Ideaworks members who have completed another Ideaworks CNC certification may register for this course at the "I Want More!" rate.

  Upon completion of this introductory class, students will have earned their Programming Level 1.  Programming Level 2 can be earned after running a minimum of 5 successful jobs while under instructor supervision.  This level includes programming and operation. Unsupervised access will be determined by instructor approval only.
  

  Prerequisites:

  • Basic understanding of Windows File Structure
  • Basic arithmetic (addition, subtraction, multiplication, division)

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection
    
  • Ear plugs if requested
    

  Upon completion of the class and projects, Ideaworks members may be certified to use the CNC unsupervised during business hours with instructor's approval.

  FREE MONTH OF MEMBERSHIP - New members only
  

  This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:  

  Join us
  

  Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  
  

  Show details
• Stained Glass Workshop: Little Bird (all levels)

  • When
    21 Aug 2026
  •  
    5:30 PM - 8:30 PM
  • Location
    Fresno Ideaworks
  • Spaces left
    0

  Registration is closed

  In this class you will learn the basic skills and practice using the tools needed to create a small stained glass treasure to hang at home or gift to a friend. 

  The workshop will cover choosing appropriate colors and textures, cutting the glass, foiling the pieces, soldering the work together, and adding the finishing touches. Each student will leave the class with a complete understanding of how to make a stained glass artwork and will take home a unique, small, hangable item.

  All materials and safety gear provided.

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery.
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection
    
  • gloves

  Upon completion of the class and projects, Ideaworks members may be certified to use the stained glass station during business hours with instructor's approval. 

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  
  

  
  

  
  

  Show details
• Stained Glass Workshop: Little Bird (all levels)

  • When
    22 Aug 2026
  •  
    10:00 AM - 1:00 PM
  • Location
    Fresno Ideaworks
  • Spaces left
    0

  Registration is closed

  In this class you will learn the basic skills and practice using the tools needed to create a small stained glass treasure to hang at home or gift to a friend. 

  The workshop will cover choosing appropriate colors and textures, cutting the glass, foiling the pieces, soldering the work together, and adding the finishing touches. Each student will leave the class with a complete understanding of how to make a stained glass artwork and will take home a unique, small, hangable item.

  All materials and safety gear provided.

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery.
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection
    
  • gloves

  Upon completion of the class and projects, Ideaworks members may be certified to use the stained glass station during business hours with instructor's approval. 

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  
  

  
  

  
  

  Show details
• Drawing Club

  • When
    22 Aug 2026
  •  
    5:00 PM - 7:00 PM
  • Location
    Fresno Ideaworks

  Register

  
  

  Live Model Drawing Club is new at Fresno Ideaworks!
  

  One of our 2026 resolutions has been to bring you more social opportunities to expand your fine arts practice. So whether you're a beginner or accomplished, and whatever your style or perspective, we're looking forward to spending time with you!

  BYO pens, pencils, charcoal, and preferred paper, but we will have some to share. $10 at the door will be shared with the model. Feel free to offer more or to donate to Fresno Ideaworks.

  
  

  Show details
• Wood Lathe - Bowl Turning

  • When
    26 Aug 2026
  •  
    5:30 PM - 9:30 PM
  • Location
    Ideaworks - 1730 H Street, Fresno, CA. 93721
  • Spaces left
    2

  Register

  
  

   If you’ve ever admired wooden bowls and wondered how to make them, here is your opportunity! We will guide you step by step through the process of turning your own bowl on the lathe with traditional turning tools. You’ll learn about stock selection, chucking, how to turn, lathe safety, and different bowl finishes. The cost of the class includes instruction as well as the wood to make the bowl, sandpaper, and finish. At the end of the day, you’ll have a bowl to take home! Length of class depends on students abilities, and can vary from 2 to 4 hours.

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards must be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection and face protection
  • Ear plugs if requested
    
  • Materials for class projects
    

  
  

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  Show details
• Intro Woodshop (beginners, refresher & safety)

  • Start
    06 Sep 2026
  •  
  • End
    20 Sep 2026
  •  
  • Schedule
    3 sessions
  • Location
    Ideaworks - 1730 H Street, Fresno, CA. 93721
  • Spaces left
    5

  Register

  Beginning Woodshop runs for 3 sessions of 4 hours and assumes no previous woodworking experience.  The goal is to train students in the basic use and safety aspects of the major tools in the woodshop.  

  Students should plan to attend all three classes.  
  
  The first meeting will cover  basic safety and project selection.  The second and third sessions will be devoted to a project that will reinforce the skills learned on day 1.  We will be using many of the tools we practiced on, as well as some layout and marking skills, to build a small project that you will be able to take home and be proud of!

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection
    
  • Ear plugs if requested
    
  • Materials for class projects
    

  Upon completion of the class, Ideaworks members may be certified to use the covered woodshop tools unsupervised during business hours with instructor's approval.

  FREE MONTH OF MEMBERSHIP - New members only

  This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:  

  Join us
  

  Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  Show details
• Beginning/Refresher Laser Cutting for Ideaworks Members

  • Start
    09 Sep 2026
  •  
  • End
    10 Sep 2026
  •  
  • Schedule
    2 sessions
  • Location
    Fresno Ideaworks Modern Fabrications Lab
  • Spaces left
    3

  Register

  
  

  In this class you will learn the fundamentals of lasers and how to use them for etching and cutting with the Boss LS1630 Laser Cutter.  The project-based class topics covered will include how to use a laser cutter safely, set up jobs, and use Lightburn software for laser control and project design. A choice of one of three small projects (materials provided) will reinforce principles of design and laser control learned in class. Students will schedule time with the instructor to complete five additional supervised projects (participants will provide their own materials).

  • This class is appropriate for students 14 and older. All minors must have a parent or guardian in the facility at all times.
  • Registration is limited to Ideaworks Members
    
  • Participants must have the ability to pay attention and focus for the entire length of the class session.
  • Experience with computer operation and drawing programs recommended.
  • Laptops will be provided, but you are encouraged to bring your own.

  Upon completion of the class and additional projects, Ideaworks members may be certified to use the Boss LS1630 laser cutter unsupervised during business hours with instructor's approval.
  

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are not required in the facility but we appreciate all efforts to help limit the spread of illness.

  Join us

  
  

  Show details
• Beginning CNC Routing/Engraving (4'X8' bed)

  • Start
    14 Sep 2026
  •  
  • End
    17 Sep 2026
  •  
  • Schedule
    2 sessions
  • Location
    Fresno Ideaworks - 1730 H Street Fresno, CA 93721
  • Spaces left
    4

  Register

  
  

  This is an introductory course on how to use the CNC machine with an emphasis on safety. In this class, you will examine the entire work flow of the CNC process, learn how to import geometry, investigate certain editing techniques, and the necessary requirements to create the g-code for tool calibration.  This final process will include setting feed and speed, how to input specifications of the raw material, etc. Finally, students will be able learn how to setup the device, how to load and secure materials, and how to set the home position and run a simple job.  This introductory class does not include any Computer Aided Design (CAD) instruction. 

  This unique class provides information and techniques that differ from those used on other CNC machines at Ideaworks. Certification on other similar machines does not grant permission to use others. Ideaworks members who have completed another Ideaworks CNC certification may register for this course at the "I Want More!" rate.

  Upon completion of this introductory class, students will have earned their Programming Level 1.  Programming Level 2 can be earned after running a minimum of 5 successful jobs while under instructor supervision.  This level includes programming and operation. Unsupervised access will be determined by instructor approval only.
  

  Prerequisites:

  • Basic understanding of Windows File Structure
  • Basic arithmetic (addition, subtraction, multiplication, division)

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection
    
  • Ear plugs if requested
    

  Upon completion of the class and projects, Ideaworks members may be certified to use the CNC unsupervised during business hours with instructor's approval.

  FREE MONTH OF MEMBERSHIP - New members only
  

  This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:  

  Join us
  

  Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  
  

  Show details
• Wood Lathe - Bowl Turning

  • When
    23 Sep 2026
  •  
    5:30 PM - 9:30 PM
  • Location
    Ideaworks - 1730 H Street, Fresno, CA. 93721
  • Spaces left
    3

  Register

  
  

   If you’ve ever admired wooden bowls and wondered how to make them, here is your opportunity! We will guide you step by step through the process of turning your own bowl on the lathe with traditional turning tools. You’ll learn about stock selection, chucking, how to turn, lathe safety, and different bowl finishes. The cost of the class includes instruction as well as the wood to make the bowl, sandpaper, and finish. At the end of the day, you’ll have a bowl to take home! Length of class depends on students abilities, and can vary from 2 to 4 hours.

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards must be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection and face protection
  • Ear plugs if requested
    
  • Materials for class projects
    

  
  

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  Show details
• Intro Woodshop (beginners, refresher & safety)

  • Start
    04 Oct 2026
  •  
  • End
    25 Oct 2026
  •  
  • Schedule
    3 sessions
  • Location
    Ideaworks - 1730 H Street, Fresno, CA. 93721
  • Spaces left
    6

  Register

  Beginning Woodshop runs for 3 sessions of 4 hours and assumes no previous woodworking experience.  The goal is to train students in the basic use and safety aspects of the major tools in the woodshop.  

  Students should plan to attend all three classes.  
  
  The first meeting will cover  basic safety and project selection.  The second and third sessions will be devoted to a project that will reinforce the skills learned on day 1.  We will be using many of the tools we practiced on, as well as some layout and marking skills, to build a small project that you will be able to take home and be proud of!

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection
    
  • Ear plugs if requested
    
  • Materials for class projects
    

  Upon completion of the class, Ideaworks members may be certified to use the covered woodshop tools unsupervised during business hours with instructor's approval.

  FREE MONTH OF MEMBERSHIP - New members only

  This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:  

  Join us
  

  Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  Show details
• Beginning/Refresher Laser Cutting for Ideaworks Members

  • Start
    05 Oct 2026
  •  
  • End
    06 Oct 2026
  •  
  • Schedule
    2 sessions
  • Location
    Fresno Ideaworks Modern Fabrications Lab
  • Spaces left
    4

  Register

  
  

  In this class you will learn the fundamentals of lasers and how to use them for etching and cutting with the Boss LS1630 Laser Cutter.  The project-based class topics covered will include how to use a laser cutter safely, set up jobs, and use Lightburn software for laser control and project design. A choice of one of three small projects (materials provided) will reinforce principles of design and laser control learned in class. Students will schedule time with the instructor to complete five additional supervised projects (participants will provide their own materials).

  • This class is appropriate for students 14 and older. All minors must have a parent or guardian in the facility at all times.
  • Registration is limited to Ideaworks Members
    
  • Participants must have the ability to pay attention and focus for the entire length of the class session.
  • Experience with computer operation and drawing programs recommended.
  • Laptops will be provided, but you are encouraged to bring your own.

  Upon completion of the class and additional projects, Ideaworks members may be certified to use the Boss LS1630 laser cutter unsupervised during business hours with instructor's approval.
  

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are not required in the facility but we appreciate all efforts to help limit the spread of illness.

  Join us

  
  

  Show details
• Beginning CNC Routing/Engraving (4'X8' bed)

  • Start
    12 Oct 2026
  •  
  • End
    15 Oct 2026
  •  
  • Schedule
    2 sessions
  • Location
    Fresno Ideaworks - 1730 H Street Fresno, CA 93721
  • Spaces left
    4

  Register

  
  

  This is an introductory course on how to use the CNC machine with an emphasis on safety. In this class, you will examine the entire work flow of the CNC process, learn how to import geometry, investigate certain editing techniques, and the necessary requirements to create the g-code for tool calibration.  This final process will include setting feed and speed, how to input specifications of the raw material, etc. Finally, students will be able learn how to setup the device, how to load and secure materials, and how to set the home position and run a simple job.  This introductory class does not include any Computer Aided Design (CAD) instruction. 

  This unique class provides information and techniques that differ from those used on other CNC machines at Ideaworks. Certification on other similar machines does not grant permission to use others. Ideaworks members who have completed another Ideaworks CNC certification may register for this course at the "I Want More!" rate.

  Upon completion of this introductory class, students will have earned their Programming Level 1.  Programming Level 2 can be earned after running a minimum of 5 successful jobs while under instructor supervision.  This level includes programming and operation. Unsupervised access will be determined by instructor approval only.
  

  Prerequisites:

  • Basic understanding of Windows File Structure
  • Basic arithmetic (addition, subtraction, multiplication, division)

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection
    
  • Ear plugs if requested
    

  Upon completion of the class and projects, Ideaworks members may be certified to use the CNC unsupervised during business hours with instructor's approval.

  FREE MONTH OF MEMBERSHIP - New members only
  

  This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:  

  Join us
  

  Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  
  

  Show details
• Wood Lathe - Bowl Turning

  • When
    21 Oct 2026
  •  
    5:30 PM - 9:30 PM
  • Location
    Ideaworks - 1730 H Street, Fresno, CA. 93721
  • Spaces left
    5

  Register

  
  

   If you’ve ever admired wooden bowls and wondered how to make them, here is your opportunity! We will guide you step by step through the process of turning your own bowl on the lathe with traditional turning tools. You’ll learn about stock selection, chucking, how to turn, lathe safety, and different bowl finishes. The cost of the class includes instruction as well as the wood to make the bowl, sandpaper, and finish. At the end of the day, you’ll have a bowl to take home! Length of class depends on students abilities, and can vary from 2 to 4 hours.

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards must be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection and face protection
  • Ear plugs if requested
    
  • Materials for class projects
    

  
  

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  Show details
• Intro Woodshop (beginners, refresher & safety)

  • Start
    08 Nov 2026
  •  
  • End
    22 Nov 2026
  •  
  • Schedule
    3 sessions
  • Location
    Ideaworks - 1730 H Street, Fresno, CA. 93721
  • Spaces left
    6

  Register

  Beginning Woodshop runs for 3 sessions of 4 hours and assumes no previous woodworking experience.  The goal is to train students in the basic use and safety aspects of the major tools in the woodshop.  

  Students should plan to attend all three classes.  
  
  The first meeting will cover  basic safety and project selection.  The second and third sessions will be devoted to a project that will reinforce the skills learned on day 1.  We will be using many of the tools we practiced on, as well as some layout and marking skills, to build a small project that you will be able to take home and be proud of!

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection
    
  • Ear plugs if requested
    
  • Materials for class projects
    

  Upon completion of the class, Ideaworks members may be certified to use the covered woodshop tools unsupervised during business hours with instructor's approval.

  FREE MONTH OF MEMBERSHIP - New members only

  This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:  

  Join us
  

  Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  Show details
• Wood Lathe - Bowl Turning

  • When
    12 Nov 2026
  •  
    5:30 PM - 9:30 PM
  • Location
    Ideaworks - 1730 H Street, Fresno, CA. 93721
  • Spaces left
    5

  Register

  
  

   If you’ve ever admired wooden bowls and wondered how to make them, here is your opportunity! We will guide you step by step through the process of turning your own bowl on the lathe with traditional turning tools. You’ll learn about stock selection, chucking, how to turn, lathe safety, and different bowl finishes. The cost of the class includes instruction as well as the wood to make the bowl, sandpaper, and finish. At the end of the day, you’ll have a bowl to take home! Length of class depends on students abilities, and can vary from 2 to 4 hours.

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards must be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection and face protection
  • Ear plugs if requested
    
  • Materials for class projects
    

  
  

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  Show details
• Beginning CNC Routing/Engraving (4'X8' bed)

  • Start
    16 Nov 2026
  •  
  • End
    19 Nov 2026
  •  
  • Schedule
    2 sessions
  • Location
    Fresno Ideaworks - 1730 H Street Fresno, CA 93721
  • Spaces left
    4

  Register

  
  

  This is an introductory course on how to use the CNC machine with an emphasis on safety. In this class, you will examine the entire work flow of the CNC process, learn how to import geometry, investigate certain editing techniques, and the necessary requirements to create the g-code for tool calibration.  This final process will include setting feed and speed, how to input specifications of the raw material, etc. Finally, students will be able learn how to setup the device, how to load and secure materials, and how to set the home position and run a simple job.  This introductory class does not include any Computer Aided Design (CAD) instruction. 

  This unique class provides information and techniques that differ from those used on other CNC machines at Ideaworks. Certification on other similar machines does not grant permission to use others. Ideaworks members who have completed another Ideaworks CNC certification may register for this course at the "I Want More!" rate.

  Upon completion of this introductory class, students will have earned their Programming Level 1.  Programming Level 2 can be earned after running a minimum of 5 successful jobs while under instructor supervision.  This level includes programming and operation. Unsupervised access will be determined by instructor approval only.
  

  Prerequisites:

  • Basic understanding of Windows File Structure
  • Basic arithmetic (addition, subtraction, multiplication, division)

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection
    
  • Ear plugs if requested
    

  Upon completion of the class and projects, Ideaworks members may be certified to use the CNC unsupervised during business hours with instructor's approval.

  FREE MONTH OF MEMBERSHIP - New members only
  

  This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:  

  Join us
  

  Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  
  

  Show details
• Beginning/Refresher Laser Cutting for Ideaworks Members

  • Start
    23 Nov 2026
  •  
  • End
    24 Nov 2026
  •  
  • Schedule
    2 sessions
  • Location
    Fresno Ideaworks Modern Fabrications Lab
  • Spaces left
    4

  Register

  
  

  In this class you will learn the fundamentals of lasers and how to use them for etching and cutting with the Boss LS1630 Laser Cutter.  The project-based class topics covered will include how to use a laser cutter safely, set up jobs, and use Lightburn software for laser control and project design. A choice of one of three small projects (materials provided) will reinforce principles of design and laser control learned in class. Students will schedule time with the instructor to complete five additional supervised projects (participants will provide their own materials).

  • This class is appropriate for students 14 and older. All minors must have a parent or guardian in the facility at all times.
  • Registration is limited to Ideaworks Members
    
  • Participants must have the ability to pay attention and focus for the entire length of the class session.
  • Experience with computer operation and drawing programs recommended.
  • Laptops will be provided, but you are encouraged to bring your own.

  Upon completion of the class and additional projects, Ideaworks members may be certified to use the Boss LS1630 laser cutter unsupervised during business hours with instructor's approval.
  

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are not required in the facility but we appreciate all efforts to help limit the spread of illness.

  Join us

  
  

  Show details
• Intro Woodshop (beginners, refresher & safety)

  • Start
    06 Dec 2026
  •  
  • End
    20 Dec 2026
  •  
  • Schedule
    3 sessions
  • Location
    Ideaworks - 1730 H Street, Fresno, CA. 93721
  • Spaces left
    6

  Register

  Beginning Woodshop runs for 3 sessions of 4 hours and assumes no previous woodworking experience.  The goal is to train students in the basic use and safety aspects of the major tools in the woodshop.  

  Students should plan to attend all three classes.  
  
  The first meeting will cover  basic safety and project selection.  The second and third sessions will be devoted to a project that will reinforce the skills learned on day 1.  We will be using many of the tools we practiced on, as well as some layout and marking skills, to build a small project that you will be able to take home and be proud of!

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection
    
  • Ear plugs if requested
    
  • Materials for class projects
    

  Upon completion of the class, Ideaworks members may be certified to use the covered woodshop tools unsupervised during business hours with instructor's approval.

  FREE MONTH OF MEMBERSHIP - New members only

  This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:  

  Join us
  

  Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  Show details
• Beginning/Refresher Laser Cutting for Ideaworks Members

  • Start
    07 Dec 2026
  •  
  • End
    08 Dec 2026
  •  
  • Schedule
    2 sessions
  • Location
    Fresno Ideaworks Modern Fabrications Lab
  • Spaces left
    4

  Register

  
  

  In this class you will learn the fundamentals of lasers and how to use them for etching and cutting with the Boss LS1630 Laser Cutter.  The project-based class topics covered will include how to use a laser cutter safely, set up jobs, and use Lightburn software for laser control and project design. A choice of one of three small projects (materials provided) will reinforce principles of design and laser control learned in class. Students will schedule time with the instructor to complete five additional supervised projects (participants will provide their own materials).

  • This class is appropriate for students 14 and older. All minors must have a parent or guardian in the facility at all times.
  • Registration is limited to Ideaworks Members
    
  • Participants must have the ability to pay attention and focus for the entire length of the class session.
  • Experience with computer operation and drawing programs recommended.
  • Laptops will be provided, but you are encouraged to bring your own.

  Upon completion of the class and additional projects, Ideaworks members may be certified to use the Boss LS1630 laser cutter unsupervised during business hours with instructor's approval.
  

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are not required in the facility but we appreciate all efforts to help limit the spread of illness.

  Join us

  
  

  Show details
• Wood Lathe - Bowl Turning

  • When
    09 Dec 2026
  •  
    5:30 PM - 9:30 PM
  • Location
    Ideaworks - 1730 H Street, Fresno, CA. 93721
  • Spaces left
    5

  Register

  
  

   If you’ve ever admired wooden bowls and wondered how to make them, here is your opportunity! We will guide you step by step through the process of turning your own bowl on the lathe with traditional turning tools. You’ll learn about stock selection, chucking, how to turn, lathe safety, and different bowl finishes. The cost of the class includes instruction as well as the wood to make the bowl, sandpaper, and finish. At the end of the day, you’ll have a bowl to take home! Length of class depends on students abilities, and can vary from 2 to 4 hours.

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards must be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection and face protection
  • Ear plugs if requested
    
  • Materials for class projects
    

  
  

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  Show details
• Beginning CNC Routing/Engraving (4'X8' bed)

  • Start
    14 Dec 2026
  •  
  • End
    17 Dec 2026
  •  
  • Schedule
    2 sessions
  • Location
    Fresno Ideaworks - 1730 H Street Fresno, CA 93721
  • Spaces left
    4

  Register

  
  

  This is an introductory course on how to use the CNC machine with an emphasis on safety. In this class, you will examine the entire work flow of the CNC process, learn how to import geometry, investigate certain editing techniques, and the necessary requirements to create the g-code for tool calibration.  This final process will include setting feed and speed, how to input specifications of the raw material, etc. Finally, students will be able learn how to setup the device, how to load and secure materials, and how to set the home position and run a simple job.  This introductory class does not include any Computer Aided Design (CAD) instruction. 

  This unique class provides information and techniques that differ from those used on other CNC machines at Ideaworks. Certification on other similar machines does not grant permission to use others. Ideaworks members who have completed another Ideaworks CNC certification may register for this course at the "I Want More!" rate.

  Upon completion of this introductory class, students will have earned their Programming Level 1.  Programming Level 2 can be earned after running a minimum of 5 successful jobs while under instructor supervision.  This level includes programming and operation. Unsupervised access will be determined by instructor approval only.
  

  Prerequisites:

  • Basic understanding of Windows File Structure
  • Basic arithmetic (addition, subtraction, multiplication, division)

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection
    
  • Ear plugs if requested
    

  Upon completion of the class and projects, Ideaworks members may be certified to use the CNC unsupervised during business hours with instructor's approval.

  FREE MONTH OF MEMBERSHIP - New members only
  

  This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:  

  Join us
  

  Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  
  

  Show details